AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |
Back to Blog
Dtmf ivr5/10/2023 ![]() VT Pin and 4 Data Pin.ī) Data pins 4 is used to indicate the number pressed in Binary.ĩ) connect the female connector to the DTMF board and connect the opposite end male connector to Linkit one board where Data 1 to 4 connecte to 8,9,10,11 of the Digital pin and VT connected to Digital pin 12. For that we have 5 Pins in the DTMF board. ![]() When program is uploaded u can able to see the DTMF leds switch on as per numbers press in mobile after calling.Ĩ) Now we want to read the numbers from the DTMF to linkit one board. Its is the mike pins.ħ) Now DTMF and Linkit one is connected. prototypes of the same IVR application: three of them are automatic speech recognition (ASR) based and the other is Dual. Connect the DTMF wire to the Tip of the pin and GNd to the second one from the top. This could be used to immediately direct the caller to a specific department of your dealership. Each key has two tones at specific frequencies. This is known as DTMF tones, or Dual-Tone Multi-Frequency tones. For that take 2 single stand wire with one side soldered to female connector and connect to the male connector of DTMF board.Ħ) Other side of the single stand wire is connected to the jack of the link it one board. DTMF is used to control automated equipment and signal user intent, such as the number they wish to dial. ![]() The DTMF decoder board need a 5V input.Ĥ) Connect the 5V and gnd from link it one board to DTMF board using wire.ĥ) Now DTMF signal want to give from Received call speaker to DTMF board. Callers can verbally indicate the options that they want in the IVR instead of pressing a digit on the. 1) At first insert the sim card in the back side of the Linkit one board.Ģ) Insert the mobile head phone with mike jack in the Linkit one board.ģ) Now take the DTMF decoder board. Configure words or phrases associated with menu options.
0 Comments
Read More
Leave a Reply. |